Green Stove ST01 Wood/Pellet Burning Tent Stove

Outdoor Heat Exchange Fins and Viewing Window for Camping

$459.00 USD

CHOOSE YOUR STOVE CONFIGURATION – Choose the standalone ST01 wood-burning stove for a straightforward setup, or select the GreenEngine 3.0 configuration for an extended burn time of approximately 6–10 hours per load under suitable operating conditions. Actual burn time varies with fuel type, fuel load, airflow settings, and environmental conditions.
AIRWASH VIEWING WINDOW – The integrated airflow design helps reduce soot buildup on the front glass, allowing you to enjoy a view of the flames during operation. Glass appearance may vary depending on fuel and operating conditions.
REAR SECONDARY AIR INTAKE – The rear air intake works with an internal flame-deflector plate to support the combustion process. This structural design helps promote more complete burning under suitable operating conditions.
WOOD-BURNING DESIGN FOR HOT TENT CAMPING – The ST01 standalone stove is designed for burning firewood and is intended for outdoor use in a properly ventilated hot tent setup. Its dedicated wood-burning configuration offers a practical heating solution for camping trips and outdoor adventures.
ENHANCED HEAT EXCHANGE WITH 10 HOLLOW FINS – Designed with 10 hollow heat-dissipation fin groups across both sides, the Green Stove ST01 increases the available heat exchange surface area to help transfer more heat into your tent. Built for outdoor camping comfort in cold-weather conditions.

22 In Stock.

Ship From:

USA

In Stock

US Only

SKU: 11081110 Categories: Tent Stoves, Wood Stoves Brand: Green Stove

Description

AI-assisted first pass

Start with the trip.
Then choose the stove.

Tell us how you reach camp, whether you will burn firewood or the optional GreenEngine 2.0 pellet setup, and how your tent chimney is routed. This quick check flags the main fit questions before you compare details.

ST01 does not have a published tent-size or temperature rating. The check focuses on packed size, weight, chimney route and the optional pellet hardware instead of estimating heating capacity.

Setup check

Does this stove fit my camp?

Camp accessFuel planShelter setup

Enter your setup above

We will flag transport, fuel-upgrade and shelter requirements before you compare specifications.

This is a first-pass screen. Final operation must follow the official product instructions.

Compare models Ask Green Stove AI

Sentry series / ST01

Heat fins that
work like chimneys.

A compact outdoor wood stove with ten hollow side heat-exchange fins, a large viewing window and dual chimney ports. Firewood is included; pellets are available with the optional GreenEngine 2.0 and GreenBox Pro setup.

Body430 stainless steel

Chimney hardware304 stainless steel

Fuel includedFirewood setup

System weightApprox. 14.8 kg

Chimney heightApprox. 265 cm

Choose by camp style

Why choose this model?

Review the practical tradeoffs before the individual features.

01 / HEAT

Ten hollow side fins.

Both sides carry a total of ten hollow heat-exchange fins that increase surface area and drive vertical convection for outdoor heating.

02 / VIEW

A clear front window.

An adjustable air curtain helps keep the viewing glass clearer while you watch and control the burn.

03 / ROUTE

Top or rear chimney.

Quick-release port covers let you switch between top-exit and rear-exit chimney layouts for different tent setups.

Why ST01

Built for heat,
view and control.

The published detail graphics focus on heat-exchange fins, dual chimney ports, secondary air, flame control and cleanout hardware.

GreenStove ST01 54 — Hollow heat-exchange fins

FinsTen hollow heat fins

Ten hollow fins on both sides multiply heat-exchange area. The vertical hollow sections create a heat-pipe effect that moves air for outdoor heating.

GlassSwitchable air curtain

Upper and lower air-curtain controls help manage soot on the viewing glass while the fire is burning.

AirRear secondary intake

Heated rear secondary air mixes above the flame to support a more complete burn. A rear intake switch adjusts airflow.

BaffleFire baffle plate

The baffle above the chamber keeps flame in the firebox longer, improves heat use and helps block sparks from the flue.

ChimneyDual chimney ports

Switch between top and rear exits with the quick-release cover. Rear exit needs the chimney bracket and a 7 cm 90° elbow.

CleanoutSegmented firebed

Three removable firebed plates and an ash drawer / hanging ash tray make ash removal and replacement straightforward.

Day camp

A compact stove station outdoors.

ST01 packs down to about 350 × 230 × 360 mm and weighs approximately 14.8 kg, so it suits vehicle-supported trips and compact tent setups that need a clear fire view.

Evening fire

Watch the burn through the front window.

Adjustable lower intake and air-curtain controls shape the flame while the large window keeps the fire easy to check after dark.

Optional pellet upgrade

Add the pellet path.

ST01 is supplied as a firewood stove system. The firebox, segmented firebed, ash hardware and telescopic chimney set belong to this product.

Included with ST01 Firewood setup

Pellet operation requires the optional system shown below.

ST02 with GreenEngine 2.0 and GreenBox Pro

Optional / sold separately

GreenEngine 2.0 + GreenBox Pro

Add GreenEngine 2.0 and GreenBox Pro when you want the optional pellet path. The source notes a single refill range of about 6–10 hours depending on setting and conditions. They are not included with ST01, and they are not the GreenEngine 3.0 Pro kit.

Buy GreenEngine 2.0 and GreenBox Pro separately
Use the top chimney port only with GreenEngine
Remove the baffle for pellet operation
Keep the damper, air curtain and secondary intake fully closed
Install at least 2.8 m of vertical chimney
A combined kit link will be added later

Explore the optional pellet systemView GreenEngine 2.0 ↗ Explore the optional pellet systemView GreenBox Pro ↗

Facts before checkout

Specifications & included system

These fields can power the page, comparison tools and AI answers from the same reviewed data.

ProductSentry ST01 outdoor stove system

SeriesSentry / ST01

Stove body430 stainless steel

Chimney, chimney base and screws304 stainless steel

FinishNatural stainless steel

Open size455 × 300 × 430 mm, excluding the 90° elbow

Packed size350 × 230 × 360 mm

Gross weightApprox. 14.8 kg

Chimney heightApprox. 265 cm

Included fuel modeFirewood

Optional fuel modeBiomass pellets with GreenEngine 2.0 + GreenBox Pro, sold separately

Pellet noteSource states about 6–10 hours per refill depending on setting and conditions

Transport note: Packed size is 350 × 230 × 360 mm and gross weight is approximately 14.8 kg. Check vehicle or carry space before ordering.

Before lighting

Build the setup around safety.

Use the official operating instructions for assembly, clearances, chimney routing, fuel and maintenance.

Outdoor use only; maintain ventilation.

Install smoke and carbon monoxide alarms.

Use the full, correctly assembled chimney system.

Keep the stove and chimney clear of combustible materials.

Wear heat-resistant gloves while tending the stove.

Let every part cool fully before moving or packing.

For GreenEngine pellet mode, follow the published pellet notes on chimney height and closed air controls.

Common questions

Answers before you order.

Does ST01 include GreenEngine or GreenBox?

No. GreenEngine 2.0 and GreenBox Pro are optional products sold separately. ST01 arrives as a firewood stove system.

Can ST01 burn pellets?

Pellet operation requires compatible GreenEngine 2.0 and GreenBox Pro hardware. The source notes about 6–10 hours per refill depending on setting and conditions, and requires the top chimney port, baffle removed, air controls closed and at least 2.8 m of vertical chimney.

How large is the packed system?

Packed size is 350 × 230 × 360 mm. Open size is 455 × 300 × 430 mm excluding the 90° elbow. Gross weight is approximately 14.8 kg.

What are the heat-exchange fins for?

Ten hollow fins on both sides increase heat-exchange area and use vertical convection to move heated air outdoors.

Can I use top or rear chimney exit?

Yes. Quick-release covers switch the outlet. Rear exit needs the chimney bracket and a 7 cm 90° elbow. GreenEngine pellet mode uses the top exit only.

Can I use it indoors?

No. It is an outdoor stove system. Follow the operating instructions for ventilation, chimney installation, clearances, smoke detection and carbon monoxide detection.