Sentry ST01

Wood or pellet tent stove with heat-exchange fins

$459.00 USD

Estimated Local Prices Live Rates
🇨🇦 CAD $657.53
🇪🇺 EUR €418.03
🇬🇧 GBP £349.93
🇦🇺 AUD $687.91
✓ Local Shipping, No Duties
Ships from USA/CA/EU/UK warehouses. Processed in USD. Bank rates may vary.
  • CHOOSE YOUR STOVE CONFIGURATION – Choose the standalone ST01 wood-burning stove for a straightforward setup, or select the GreenEngine 3.0 configuration for an extended burn time of approximately 6–10 hours per load under suitable operating conditions. Actual burn time varies with fuel type, fuel load, airflow settings, and environmental conditions.
  • AIRWASH VIEWING WINDOW – The integrated airflow design helps reduce soot buildup on the front glass, allowing you to enjoy a view of the flames during operation. Glass appearance may vary depending on fuel and operating conditions.
  • REAR SECONDARY AIR INTAKE – The rear air intake works with an internal flame-deflector plate to support the combustion process. This structural design helps promote more complete burning under suitable operating conditions.
  • WOOD-BURNING DESIGN FOR HOT TENT CAMPING – The ST01 standalone stove is designed for burning firewood and is intended for outdoor use in a properly ventilated hot tent setup. Its dedicated wood-burning configuration offers a practical heating solution for camping trips and outdoor adventures.
  • ENHANCED HEAT EXCHANGE WITH 10 HOLLOW FINS – Designed with 10 hollow heat-dissipation fin groups across both sides, the Green Stove ST01 increases the available heat exchange surface area to help transfer more heat into your tent. Built for outdoor camping comfort in cold-weather conditions.

21 In Stock.

Ship From:

US Only
SKU: 11081110 Categories: , Brand:
Sentry 01 outdoor wood and pellet stove

Product introduction

Sentry 01 outdoor multi-function stove

A compact outdoor fireplace with a hard-edged tactical look — built for camp heat, fire viewing, and dual chimney layouts.

  • Ten hollow heat-exchange fins on both sides multiply heating surface area.
  • Air-curtain system helps keep the front viewing glass clearer while burning.
  • Rear secondary intake with fire baffle for a more complete burn and cleaner exhaust.
  • Top or rear chimney exit with quick-release covers for different tent setups.
Sentry 01 outdoor multi-function stove

Product details

Specifications

NameSentry 01
Body430 stainless steel
Chimney / base / screws304 stainless steel
FinishNatural stainless steel
Open size455 × 300 × 430 mm (excl. 90° elbow)
Packed size350 × 230 × 360 mm
Gross weightApprox. 14.8 kg
Chimney heightApprox. 265 cm
FuelFirewood / biomass pellets
Pellet pathOptional GreenEngine + GreenBox

Dimensions

Packed and open sizes

Packed size

Packed size

Width13.8 in / 35 cm
Depth9.1 in / 23 cm
Height14.2 in / 36 cm
Listed as350 × 230 × 360 mm
Open size

Open size

Width17.9 in / 45.5 cm
Depth11.8 in / 30 cm
Height16.9 in / 43 cm
Listed as455 × 300 × 430 mm

Product demonstration

In camp

In camp In camp In camp

At a glance

Core highlights

Core highlights
Hollow heat fins
01

Hollow heat fins

Ten hollow fins on both sides multiply heat-exchange area for outdoor heating.

External ash tray
02

External ash tray

Catches ash when the door opens and helps protect the groundsheet.

Air curtain
03

Air curtain

Switchable air-curtain intakes help keep the viewing glass clearer while burning.

What’s included

Configuration list

  • ST01 stove body
  • Three-section firebed
  • Ash tray
  • Quick-release chimney base
  • Chimney port cover
  • Ash rake
  • External ash tray
  • Fire baffle set
  • 7–7.5 cm telescopic chimney set
  • Wind-rope ring
  • Screw accessory pack
  • Dedicated leather storage bag
  • All listed parts pack into the stove body
Configuration list

Detailed features

Feature points

Telescopic chimney
01 / Chimney

Telescopic chimney

Raises chimney height without increasing packed volume.

  • 7 × 30 cm chimney × 3
  • 7.5 × 30 cm chimney × 3
  • 7.5 × 22 cm chimney × 2
  • 7 × 30 cm damper pipe × 1
  • 7–7.5 × 30 cm adapter × 1
  • 7.5 × 30 cm windbreak pipe × 1
  • 7 cm 90° elbow × 2
Flame control
02 / Flame

Flame control

Adjustable lower intake plus upper and lower air curtains, with a tight door seal, for precise burn speed and different flame shapes.

Use with GreenEngine
03 / Pellet path

Use with GreenEngine

Pair with GreenEngine and GreenBox for the optional pellet path. A single refill can run about 6–10 hours, depending on environment and heat setting.

Note: Use the top chimney port only. Remove the baffle. Keep the damper, air curtain and secondary intake fully closed. Install at least 2.8 m of vertical chimney. Side-exit builds or chimney platforms need extra vertical height.
Hollow heat-exchange fins
04 / Heat

Hollow heat-exchange fins

Ten hollow fins on both sides multiply heat-exchange area. The vertical hollow sections create a heat-pipe effect that moves air for outdoor heating.

Fire baffle
05 / Baffle

Fire baffle

Placed above the chamber to cover the flue opening, the baffle keeps flame in the firebox longer, improves heat use, and helps block sparks from the chimney.

Rear secondary intake
06 / Air

Rear secondary intake

Heated rear air mixes above the flame to support a more complete burn. A rear intake switch adjusts airflow.

Segmented firebed
07 / Firebed

Segmented firebed

Three removable firebed plates make ash cleanup and replacement straightforward, and work with the baffle for a livelier flame.

External ash tray
08 / Ash

External ash tray

Catches ash when the door opens, helping protect the groundsheet and reduce fire risk.

Ash drawer
09 / Drawer

Ash drawer

Sits under the firebed for easy ash removal. Use the ash rake to pull the drawer without touching hot parts.

Switchable air curtain
10 / Air curtain

Switchable air curtain

Door air-curtain intakes help reduce soot on the glass and support cleaner burning.

Inverted chimney
11 / Chimney joint

Inverted chimney

Inverted chimney fit helps keep tar from leaking at the collar, so the outer pipe stays cleaner.

Dual chimney ports
12 / Chimney exit

Dual chimney ports

Switch between top and rear exits with the quick-release cover. Rear exit needs the chimney bracket and a 7 cm 90° elbow.

Folding legs
13 / Legs

Folding legs

Fold flat for packing. Opened, they raise the stove for steadier standing and easier operation, and help keep hot surfaces off the ground.

Dedicated storage bag
14 / Carry

Dedicated storage bag

Sized for this stove. Outer textured leather-look shell resists water; thick foam lining protects the body in transit.

Accessories that fit this stove. Confirm sizing notes on each product page before checkout.

More Accessories