Start with the stove.
Then check the installation.
GreenEngine 3.0 Pro is an accessory, so fit starts with the host stove. Check the opening, mounting area, chimney diameter, vertical chimney height and safe clearances before ordering.
Does this kit fit my stove?
Confirm the stove opening, mounting area, chimney route and safe clearances before comparing dimensions.
This screen checks the published fit requirements. Final installation must follow the GreenEngine and host-stove instructions.
Make your wood stove
pellet-ready.
An adjustable pellet burner and two-piece nesting hopper designed to add a controlled biomass-pellet path to a compatible large wood stove.
Why choose this model?
Review the practical tradeoffs before the individual features.
Adjust the pellet burn.
Matching side controls change the available space inside the combustion chamber. Set both sides evenly before operation.
Nest the parts together.
The two hopper sections separate and nest, with the burner stored inside for a compact packed form.
Verify the host stove first.
GreenEngine is made for a suitable large wood stove and requires a correctly routed chimney with adequate draft.
See the pellet system
before you install it.
Watch the GreenEngine 3.0 Pro introduction for a closer look at the burner, nesting hopper, controls and installed pellet setup.
Open on YouTube ↗Control the burn.
Pack the system down.
The main operating and packing details are presented as short, verifiable product facts.
Adjust both sides evenly to change the space available for burning pellets at one time.
Use wood pellets measuring 6–8 mm in diameter and no more than 35 mm long.
The two lighting ports provide access for ignition and must be closed after the pellets are lit.
Check the flame through the burner window and the remaining pellet level through the hopper windows.
The air inlet closes during the final stage to direct airflow through the hopper and help limit smoke moving toward stored pellets.
The burner secures to a suitable host stove with rotating tabs; confirm fit and engagement before lighting.
See every part in context.
The burner sits between the nesting hopper and a compatible large wood stove. The stove, chimney and fuel shown are not included.
Carry pellets above the burn chamber.
Two hopper sections form the operating assembly, then separate and nest for transport and storage.
Check the stove
before you order.
GreenEngine 3.0 Pro is not a standalone stove. The host stove, chimney route and available clearances determine whether the complete installation is suitable.
Suitable large wood stove
Confirm the stove opening, flat mounting area, locking-tab engagement and room for the burner and hopper.
8–9 cm system
Provide at least 3.5 m of vertical chimney. A side-exit arrangement may require additional vertical height to establish draft.
Follow pellet-mode settings
Keep the host stove’s air door, airwash and secondary-air inlets closed during pellet operation as specified in the instructions.
Measure the host stove and review the entire chimney route before checkout. The wood stove, chimney, pellets and lighting equipment are sold separately.
Specifications & included system
These fields can power the page, comparison tools and AI answers from the same reviewed data.
Build the setup around safety.
Plan the complete stove, chimney and shelter installation before lighting the pellet system.
Answers before you order.
Is GreenEngine 3.0 Pro a complete stove?
No. It is an accessory pellet burner and nesting hopper. A compatible wood stove, chimney, pellets and lighting equipment are required separately.
Which stoves are compatible?
It is intended for suitable large wood stoves, but chimney diameter alone does not prove fit. Confirm the stove opening, mounting area, locking arrangement, burner dimensions and clearances before ordering.
What pellets should I use?
Use wood pellets measuring 6–8 mm in diameter and no more than 35 mm long. Follow the operating instructions for loading and ignition.
What chimney does the system require?
Use a suitable 8–9 cm chimney system with at least 3.5 m of vertical chimney. Side-exit configurations may require additional vertical height.
Does closing the hopper feed extinguish the fire?
No. The feed shutoff blocks additional pellets from entering the burner, but pellets already in the combustion chamber continue burning until consumed or safely managed according to the instructions.
What is included in the kit?
The listing includes the GreenEngine 3.0 Pro burner and two-piece nesting hopper. The host stove, chimney, pellets and lighting equipment are not included.
