
Product introduction
GreenEngine 3.0 Pro pellet burner kit
A newly designed pellet burner and nesting hopper that turns a compatible large wood stove into a controlled biomass-pellet system — with steadier burn, broader pellet compatibility, and finer firepower control than earlier GreenEngine generations.
- High-power output for larger wood stoves and bigger heated spaces.
- Automatic closing air intake for stable running without back-smoke.
- Compatible with 6–8 mm wood pellets up to 35 mm long.
- Stepless firepower control for different camp scenarios.
- NOTE: Fits large wood stoves on an 8–9 cm chimney system. Install at least **3.5 m** of vertical chimney; side-exit builds need extra height. Keep the host stove’s damper, air curtain, and secondary intake fully closed for the whole pellet burn.

Product details
Specifications
Dimensions
Packed and assembled sizes

Packed size

Hopper assembled
Product demonstration
Kit views
At a glance
Core highlights


Waterfall flame
Flame falls from top to bottom in a rolling sheet — strong heat with a clear fire view.

Stepless firepower
Twin side knobs compress chamber space evenly to dial burn volume up or down.

Nesting pack
Hopper halves nest and the burner stores inside for a compact leather-bag carry.
What’s included
Configuration list
- GreenEngine 3.0 Pro pellet burner
- Two-piece nesting pellet hopper
- Dedicated leather storage bag
- All listed parts nest into the packed hopper

Detailed features
Feature points

Burner size
Pellet burner body: 165 × 140 × 195 mm (6.5 × 5.51 × 7.68 in). Confirm host-stove opening and clearances against this drawing before ordering.

Waterfall flame
Flame falls from top to bottom in a rolling sheet — strong heat with a clear fire view through the host stove glass.

Automatic closing intake
Near the end of the burn the burner air inlet closes automatically, forcing intake through the hopper path to pull away residual smoke toward the stored pellets.

Stepless firepower
Turn both side knobs inward together. Limit plates compress chamber space, reducing the pellet volume that can burn at once and lowering output. Keep both sides matched.

Dual lighting ports
Wide lighting openings on both sides let a torch reach the pellets quickly. Close both ports after ignition. Watch the burn through the burner window.

Rotating locking tabs
Two rotating tabs at the burner base lock onto a compatible host stove so the kit stays secure while running.

Quick-release burn grate
Remove the thumb screws on both sides to take the grate out for cleaning or replacement — no extra tools.

Hopper viewing windows
Narrow vertical windows on the hopper show remaining pellet level without opening the lid.

Interrupt the feed
Loosen the funnel thumb screws and slide them to the bottom to drop the internal stop plates, cutting pellet feed from hopper to burner. Remove the hopper after both pins are in.

Tool-free quick release
Latches and thumb screws handle assembly and pack-down — no tools required for normal setup.

Nesting storage
Separate the hopper halves, nest them together, and store the burner inside for a compact packed form.

Leather storage bag
Sized for the nested kit. Textured leather-look shell resists water; thick foam lining protects the burner in transit.






